AtlasIED Logo.png
Atmosphere.png
Atmosphere-TM-Logo-Black.png

Experience freedom of Flexibility to create your

Atmosphere-TM-Logo-Black.png
Background-Simplicity-In-Design-Narrow.j

DIGITAL AUDIO PROCESSORS

Atmosphere’s 4 and 8 zone audio processors are the heart of the audio control system and offer powerful DSP combined with innovative algorithms. Programming is simple through a modern, on-board web interface. Built around Progressive Web App technology, the control interface is device agnostic, responsive, and meticulously designed for an ideal user experience without sacrificing design freedom.

 
atmosphere-4-zone-audio-processor.png

AZM4

Atmosphere's 4 zone audio processor

atmosphere-8-zone-audio-processor.png

AZM8

Atmosphere's 8 zone audio processor

4 zones Audio Processor

The Atmosphere AZM4 is

  • An 4-zone audio processor

  • Compatible with all six of the Atmosphere accessories for control, remote audio input, and ambient noise sensing

  • Up to 16 plug-and-play Accessories can be connected across 2 accessory ports

  • Each port designed to work reliably up to 1000ft.

8 zones Audio Processor

The Atmosphere AZM8 is

  • An 8-zone audio processor

  • Compatible with all six of the Atmosphere accessories for control, remote audio input, and ambient noise sensing. 

  • Up to 16 of these plug-and-play Accessories can be connected across 4 accessory ports

  • Each port designed to work reliably up to 1000ft.

Features

Network Ready | Onboard DSP | Ambient Noise | Web Browser Based Control

 Message Player | Connect with WIFI | GPIO | Tilter Filter

AZM4

  • On board WIFI to use as an access point or connect to existing Wi-Fi network

  • 2 accessory ports that support up to 8 plug and play accessories each (maximum 16 per AZM4)

  • Auto noise compensation available for all zones

  • Large library of AtlasIED speaker presets

  • Integrated message player

  • App-less virtual wall controller access via QR code

AZM8

  • On board WIFI to use as an access point or connect to existing Wi-Fi network

  • 4 accessory ports that support up to 8 plug and play accessories each (maximum 16 per AZM8)

  • Auto noise compensation available for all zones

  • Large library of AtlasIED speaker presets

  • Integrated message player

  • App-less virtual wall controller access via QR code

  • 00ft.

Marble Surface

ACCESSORIES

Expanding upon the AZM processor’s capabilities are six plug-n-play, smart Wall Plate accessories. Three audio input plates, two different controllers, and one sensor for Ambient Noise Compensation. Any accessory can be daisy chained on a single cable digital bus up to 1000ft and assigned to any zone, reducing installation wiring time and complexity.

Atmosphere™ Zone, Source, and Volume Wall Controller

0026904_atmosphere-zone-source-and-volum

C-ZSV-US

Atmosphere™ Volume Controller

0026905_atmosphere-volume-controller_300

C-V-US

Atmosphere™ Remote Bluetooth™ Audio Input

0026906_atmosphere-remote-bluetooth-audi

A-BT-US

Atmosphere™ Remote XLR Input

0026907_atmosphere-remote-xlr-input_300.

A-XLR-US

Atmosphere™ RCA/3.5mm Audio Input

0026908_atmosphere-rca35mm-audio-input_3

A-RCA-US

Atmosphere™ Ambient Noise Sensor

0026909_atmosphere-ambient-noise-sensor_

X-ANS-US

Atmosphere™ Virtual Wall Controller QR Code Holder

GEM-5

 
Background-Auto-ANC.jpg

DIGITAL AMPLIFIERS

Atmosphere four channel 400 & 800W amplifiers are designed to interface with Atmosphere signal processors, such as the AZM. Configured out of the box to fit most installations, the AZA amplifiers can be programmed via onboard web UI for 70V, 100V, 8Ω, or 4Ω output modes.

0026891_400-watt-networkable-4-channel-p
0026886_800-watt-networkable-4-channel-p

400-WATT NETWORKABLE

4-CHANNEL POWER AMPLIFIER

AZA404

FEATURES

  • 70V, 100V, 8Ω, or 4Ω functionality, configurable in channel pairs

  • Up to 100W per channel (4 x 100W)

  • Four (4) balanced inputs

  • Web interface to change output modes and additional monitoring/processing

  • Optional Accessory Card Slot for a Four-Channel Dante™ Receiver (DPA-DAC4)

800-WATT NETWORKABLE

4-CHANNEL POWER AMPLIFIER

AZA804

FEATURES

  • 70V, 100V, 8Ω, or 4Ω functionality, configurable in channel pairs

  • Up to 200W per channel (4 x 200W)

  • Four (4) balanced inputs

  • Web interface to change output modes and additional monitoring/processing

  • Optional Accessory Card Slot for a Four-Channel Dante™ Receiver (DPA-DAC4)

 
 

Need an ideal user experience without sacrificing your design freedom?

Please fill in the form below and we will contact you shortly.

arrow&v

Thanks for submitting! We will contact you shortly!